PREVIOUS PROJECTS
Colair Electronics design, manufacture and produce various bespoke products. Have a look at some of the previous projects we have completed. If you would like any of our previous bespoke products, something similar or have a product of your own in mind, feel free to call 01255 433525 or email us at info@colairelectronics.co.uk.
0 – 10 DC Input Speed Controller
The 0 – 10 DC Input Speed Controller is designed as a remote control for 240 volt Fan Speed Controllers. The 0 – 10 DC Input Speed Controller can manage Fan Speed Controllers through a BMS system or by using a sensor. This controller can be used remotely enabling you to switch the Fan Speed Controller on or off at anytime using a volt free switch.
Automatic Changeover Duty Share Panel
This automatic changeover duty share panel has been designed to manage the speed of twin fans. This automatic change over panel is selectable up to 8 Amps.
The automatic changeover panel will automatically changeover to the standby fan by the current sensing of fan failure. The panel also combines duty sharing, selectable up to 24 hours. The control panel can be switched on and off from an external voltage signal, the panel combines auto duty sharing (test) 6 hours, 24 hours, and 1 week.
Automatic Electronic Speed Controllers
Colair Electronics Commercial Automatic Fan Speed Controller provides a simple solution to speed controlling commercial fans. This advanced system also offers a manual control option which enables the user to easily change the fan speed.
E/C Changeover/ Dutyshare
This Automatic Changeover Duty Share Panel has been designed to manage the speed of twin fans. This Automatic Changeover Panel is selectable up to 8 Amps. The Automatic Changeover Panel will automatically changeover to the standby fan by the current sensing of fan failure. The Panel also combines duty sharing, which allows for the fan motors to switch over after a pre-selected time. The pre-selection options are 3, 6, 9, 12, 15, 18, 21 and 24 hours.
ME – Manual Electronic Speed Controllers
Colair Electronics produce high quality ME – Manual Electronic Fan Speed Controllers that are exceedingly energy efficient. The front panel on this device makes it easy for you to adjust the speed for all types of fans. On the front panel of this device you can also manage the voltage. Our Manual Electronic Fan Speed Controllers use single-phase AC motors. Centrifugal, axial and propeller fans are all suitable components to be managed through this device.
PWM Fan Controllers
This unit has been designed to manage the speed of multiple fans. You can adjust the duties of this PWM Controller in 3 simple steps. The controller is devised to asses the current going into the unit, it can also manage the airflow levels. This advanced change over panel also offers a BMS connection.
Trickle & Boost For DC Fans
The Trickle and Boost Controller by Colair Electronics will connect to most DC Fans and Inverters via the 10v input and allow the control of fan speed via a present speed for a minimum speed and a maximum speed set for when the boost is enabled e.g. by a PIR.
Mounted inside IP56 rated enclosure.
BMS compatible.
Trickle & Boost For EC Fans
The Trickle and Boost Controller for EC Fans by Colair Electronics are housed in the IP56 box along with all the connections. These can be used on Inverters and Fans for 5 to 15 volt systems. This unit is operated from a 230vAC signal from a standard PIR. We have more advanced units that use the TACHO signal from the fan for sending a BMS output on a fault occurring.